This is the PFD left CRT screen in Zoom mode. To Zoom the PFD screen, click on its face.
Note that in this view, the 360 degree HSI, DME, VOR1 and VOR2 are active on the screen.
These are turned on via Softkey selections along the bottom of the screen in which the buttons
align with word Menu's. Use 'BACK' to return to main Softkey Menu after each selection.
Note that in this view, the 360 degree HSI, DME, VOR1 and VOR2 are active on the screen.
These are turned on via Softkey selections along the bottom of the screen in which the buttons
align with word Menu's. Use 'BACK' to return to main Softkey Menu after each selection.
This is a zoomed in screenshot of the graphics of the left hand PFD CRT screen. Note the HSI
Compass is in Display mode as well as VOR1, VOR2, and DME info. Transponder is off. Note
the BACK key on the right bottom. This will return you to the main Menu for the Softkeys.
Note the symetrical design of the Garmin screens edge button layouts. In the actual system,
the buttons are redundent. In the Kodiak, we have simplified it to have the Avioinics controls
work on the PFD screen only and the GPS and Engine and TCAS Traffic readout controls work
on the center MFD screen only so they are grouped and easily remembered.
Compass is in Display mode as well as VOR1, VOR2, and DME info. Transponder is off. Note
the BACK key on the right bottom. This will return you to the main Menu for the Softkeys.
Note the symetrical design of the Garmin screens edge button layouts. In the actual system,
the buttons are redundent. In the Kodiak, we have simplified it to have the Avioinics controls
work on the PFD screen only and the GPS and Engine and TCAS Traffic readout controls work
on the center MFD screen only so they are grouped and easily remembered.
